CTS Turbo FRONT Subframe Bushing Insert Kit: MK5/MK6/8P Audi A3 CTS TURBO number CTS-HW-036
Roll over image to zoom in
100 $
CTS Turbo FRONT Subframe Bushing Insert Kit: MK5/MK6/8P Audi A3 CTS-HW-036
Hight quality performance components from CTS TURBO in RACELINE TUNING LLC
Description:
CTS Turbo is proud to announce our new billet subframe bushing insert kit (applications listed below). This kit is designed to eliminate the clunk that is commonly found on MK5’s and MK6’s due to the stretching of OEM bolts stretching and failing. Our kit will repair the OEM TSB for the clunk correctly by reducing the large factory tolerances at the subframe mounting points.
Features:
- Interlocking subframe shims center the front subframe to the body
- Machined in house from T6061 Billet aluminum
- OE replacement stretch bolts
- Eliminates subframe clunks and shifting
Kit Components:
- 6 x Upper Insert
- 6 x Lower Insert
- 4 x Short OE Bolts
- 2 x Long OE Bolts
Torque specs:
- 18mm bolts = 70Nm+180deg (do not re-use)
- 16mm bolts = 50Nm + 90deg (can be re-used once)
- 13mm bolts = 20Nm + 90deg (can be re-used once)
Fitment:
- MK5 GTI/GLI/R32/Jetta/Rabbit
- MK6 GTI/Golf R/Golf – Aluminum Subframe only, will not fit Jettas with steel subframe
- 8P Audi A3/S3
- B6 Passat/Passat CC
Note: wheel alignment required after installation.
For car: AUDI A3 8P
Stock status: instock
CTS Turbo is an industry-leading performance parts manufacturer. With over 10 years in VW and Audi performance, CTS have mastered craft and have expanded across multiple makes, including BMW, Toyota, Mini, Mercedes-Benz, Nissan, and Ford. CTS Turbo mission is to make horsepower affordable. CTS offer bolt on solutions for everything from the DIY garage build to the clean room built Dyno queen, and everything in between.
*CTS Turbo is an independent entity and is not affiliated with VAG Group, Mercedes, BMW, MINI, Toyota, Ford, Tesla, or Nissan. All phrases, slogans, and logos are registered trademarks and copyrights of their respective manufacturers. Any references to these manufacturers’ vehicles are purely for descriptive purposes. These manufacturers do not endorse or assume any responsibility for our products or actions. The use of vehicle logos in our materials is solely for illustrative purposes and has not been approved by the respective manufacturers.
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 8 × 8 × 8 in |
| BRAND | |
| Car brand | |
| Car model cts | |
| Car type cts | |
| CTS type |
